Hint: Always add your smart devices in the same room you have the OZOM Box. After the device is connected you can move it to its desired location and test range.
To set up the Smart Plug connect it into an outlet close to the Hub.
Hit the button in the Ozom App to set the Ozom Box into search mode.
This icon indicates the Hub is search mode for two minutes:
Press and hold the LED button (see arrow) for 10 seconds until it flashes. This indicates that the adding process has started.
It may take some time (up to a few minutes) before the OZOM App connects with the device. The process is finished once you see the device tile in the App dashboard.
Rename device: Click the gear icon in the device tile and then select the ... icon to access the menu.
Installation: After installing the device in its final position test that it is within the Hub's range. To perform the test use the App to toggle the device. If the device is within range it will toggle.
If the device is out of range move it to a location closer to the Hub.
If adding is not succesful move to a location closer to your Hub and repeat the adding process.
ZigBee repeater function The Smart Plug also serves as a ZigBee repeater to extend the range of the Hub. You can install it in a convenient location to allow other ZigBee devices to connect the network.
Maximum Operation Load For 110V: the maximum operation load is 1760W and 16A. For 230V: the maximum operation load is 3680W and 16A.